© urbanfinish 1991-2020 ROCKART EUROPE LTD LONDON - BIRMINGHAM - EDINBURGH
urbanfinish
fittings and finishes for the built environment
e-mail: [email protected]
We manufacture a wide range of Blister Tactile Paving fittings - from the 'Original' brushed fitting which we were the first to produce in accordance with the regulations (1991), or TopGrip Anti-Slip, Resin-Topped, Top-Hat - and many other versions. Whichever type is chosen, all are designed to be retro-fitted into almost any existing paving.
Our Technical Services office provides great assistance to clients and contractors to rinstall the units.
25-16mm diameter x 5.0mm (+/- 0.5mm) high, we design and manufacture all of our products to be compliant with the Department for the Environment, Transport and the Regions (DETR) "Guidance on the Use of Tactile Paving Surfaces - DETR 1998", BS7997:2003. Products for tactile paving surface indicators: Specification
Studs should be positioned 66.8mm c/c.
Grid pattern layout is used to indicate pedestrian crossings with dropped kerbs, light-controlled crossings, and crossings with no traffic lights. Offset pattern layout is used to indicate the edge of the platform at Rail stations, or off-street applications. The set-out of the pattern is critical - the rows of blisters must be parallel to the kerb-edge, and generally set back 400mm back.
A Stainless Steel site drilling template can be supplied to suit any application - contact our Technical Services office for assistance.
© urbanfinish 2011 (a division of RockArt Europe Ltd.) LONDON - YORKSHIRE - EDINBURGH